In single-family housing, systems using air collectors are also used. Air is the working medium in this type of collector, which, after heating, can be used directly for heating living quarters, sports halls, swimming pools, industrial halls, livestock buildings, warehouses, etc.. or to heat exchangers. The absorbers in these collectors are most often made of metal sheets blackened with selective materials on the outside, painted black on the underside, if air is pumped under the absorber. Selective surfaces also in this type of collectors increase their efficiency by 50-65% at low temperatures and by 15-35% at higher temperatures. The absorber should not be plane. Absorbers with ribs or corrugated sheets are much more efficient, to increase the exchange surface.
Air can be conveyed in three different ways:
a) over the absorber (ineffective),
b) ponad i pod absorberem (most efficient at low temperatures),
c) pod absorberem (best at high temperatures).
Collectors of this type have many advantages:
— mniejsze wymagania techniczne — taniość,
— nie zamarzają,
— nie występuje zjawisko zwiększenia objętości, or changes in the state of aggregation when heated (overheating),
— nie występują uszkodzenia i przecieki systemu,
— łatwość obsługi i konserwacji.
The main drawbacks of air collectors are:
— mała pojemność cieplna powietrza (it is necessary to transfer the same heat load in the water collector 30 dm3 of water, and in the air - 120 kg, that is 100 m3 of air),
— przekroje przewodów powietrznych dużo większe jak wodnych,
— sprawność wymienników ciepła między powietrzem a wodą gorsza jak między wodą a wodą (or some other liquid).